pub struct ActiveSettingsScreen { /* private fields */ }
Expand description
Component marking an active settings screen
Trait Implementations§
Source§impl Component for ActiveSettingsScreen
impl Component for ActiveSettingsScreen
Source§const STORAGE_TYPE: StorageType = bevy::ecs::component::StorageType::Table
const STORAGE_TYPE: StorageType = bevy::ecs::component::StorageType::Table
A constant indicating the storage type used for this component.
Source§type Mutability = Mutable
type Mutability = Mutable
A marker type to assist Bevy with determining if this component is
mutable, or immutable. Mutable components will have [
Component<Mutability = Mutable>
],
while immutable components will instead have [Component<Mutability = Immutable>
]. Read moreSource§fn register_required_components(
requiree: ComponentId,
components: &mut ComponentsRegistrator<'_>,
required_components: &mut RequiredComponents,
inheritance_depth: u16,
recursion_check_stack: &mut Vec<ComponentId>,
)
fn register_required_components( requiree: ComponentId, components: &mut ComponentsRegistrator<'_>, required_components: &mut RequiredComponents, inheritance_depth: u16, recursion_check_stack: &mut Vec<ComponentId>, )
Registers required components.
Source§fn clone_behavior() -> ComponentCloneBehavior
fn clone_behavior() -> ComponentCloneBehavior
Called when registering this component, allowing to override clone function (or disable cloning altogether) for this component. Read more
§fn register_component_hooks(hooks: &mut ComponentHooks)
fn register_component_hooks(hooks: &mut ComponentHooks)
👎Deprecated since 0.16.0: Use the individual hook methods instead (e.g.,
Component::on_add
, etc.)Called when registering this component, allowing mutable access to its [
ComponentHooks
].§fn on_add() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
fn on_add() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
Gets the
on_add
[ComponentHook
] for this [Component
] if one is defined.§fn on_insert() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
fn on_insert() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
Gets the
on_insert
[ComponentHook
] for this [Component
] if one is defined.§fn on_replace() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
fn on_replace() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
Gets the
on_replace
[ComponentHook
] for this [Component
] if one is defined.§fn on_remove() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
fn on_remove() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
Gets the
on_remove
[ComponentHook
] for this [Component
] if one is defined.§fn on_despawn() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
fn on_despawn() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>
Gets the
on_despawn
[ComponentHook
] for this [Component
] if one is defined.§fn map_entities<E>(_this: &mut Self, _mapper: &mut E)where
E: EntityMapper,
fn map_entities<E>(_this: &mut Self, _mapper: &mut E)where
E: EntityMapper,
Maps the entities on this component using the given [
EntityMapper
]. This is used to remap entities in contexts like scenes and entity cloning.
When deriving [Component
], this is populated by annotating fields containing entities with #[entities]
Read moreAuto Trait Implementations§
impl Freeze for ActiveSettingsScreen
impl RefUnwindSafe for ActiveSettingsScreen
impl Send for ActiveSettingsScreen
impl Sync for ActiveSettingsScreen
impl Unpin for ActiveSettingsScreen
impl UnwindSafe for ActiveSettingsScreen
Blanket Implementations§
Source§impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
Source§fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<Swp, Dwp, T>,
fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<Swp, Dwp, T>,
Convert the source color to the destination color using the specified
method
Source§fn adapt_into(self) -> D
fn adapt_into(self) -> D
Convert the source color to the destination color using the bradford
method by default
§impl<T, U> AsBindGroupShaderType<U> for T
impl<T, U> AsBindGroupShaderType<U> for T
§fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
Return the
T
[ShaderType
] for self
. When used in [AsBindGroup
]
derives, it is safe to assume that all images in self
exist.Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
§impl<C> Bundle for Cwhere
C: Component,
impl<C> Bundle for Cwhere
C: Component,
fn component_ids( components: &mut ComponentsRegistrator<'_>, ids: &mut impl FnMut(ComponentId), )
§fn register_required_components(
components: &mut ComponentsRegistrator<'_>,
required_components: &mut RequiredComponents,
)
fn register_required_components( components: &mut ComponentsRegistrator<'_>, required_components: &mut RequiredComponents, )
Registers components that are required by the components in this [
Bundle
].§fn get_component_ids(
components: &Components,
ids: &mut impl FnMut(Option<ComponentId>),
)
fn get_component_ids( components: &Components, ids: &mut impl FnMut(Option<ComponentId>), )
Gets this [
Bundle
]’s component ids. This will be None
if the component has not been registered.§impl<C> BundleFromComponents for Cwhere
C: Component,
impl<C> BundleFromComponents for Cwhere
C: Component,
§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Converts
Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
, which can then be
downcast
into Box<dyn ConcreteType>
where ConcreteType
implements Trait
.§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Converts
Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
, which can then be further
downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
.§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Converts
&Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s.§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Converts
&mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s.§impl<T> DowncastSend for T
impl<T> DowncastSend for T
§impl<C> DynamicBundle for Cwhere
C: Component,
impl<C> DynamicBundle for Cwhere
C: Component,
§impl<S> FromSample<S> for S
impl<S> FromSample<S> for S
fn from_sample_(s: S) -> S
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
Source§fn into_color(self) -> U
fn into_color(self) -> U
Convert into T with values clamped to the color defined bounds Read more
Source§impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
Source§fn into_color_unclamped(self) -> U
fn into_color_unclamped(self) -> U
Convert into T. The resulting color might be invalid in its color space Read more
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read more§impl<T> Pointable for T
impl<T> Pointable for T
§impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
§fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct
self
from the equivalent element of its
superset. Read more§fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if
self
is actually part of its subset T
(and can be converted to it).§fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as
self.to_subset
but without any property checks. Always succeeds.§fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts
self
to the equivalent element of its superset.§impl<T, U> ToSample<U> for Twhere
U: FromSample<T>,
impl<T, U> ToSample<U> for Twhere
U: FromSample<T>,
fn to_sample_(self) -> U
Source§impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
Source§fn try_into_color(self) -> Result<U, OutOfBounds<U>>
fn try_into_color(self) -> Result<U, OutOfBounds<U>>
Convert into T, returning ok if the color is inside of its defined
range, otherwise an
OutOfBounds
error is returned which contains
the unclamped color. Read more